Thermo Scientific Barnstead GenPure xCAD Plus System, Operating Instructions Manual

Page: 82 / 128

12
System control
.OEM Menu
76
GenPure Thermo Scientific
Program selection
The program according to which system control operates is set in this menu.
The following possibilities are given:
Basic setting: RWS (Ultrapure water system)
After entering the OEM menu press the menu-button twice then the display shows:
Entering system version and serial number
The system version and system serial number can be entered in this menu. The two are then printed
out as header on each print-out. Use the arrow buttons to enter the settings. The number of the
software version is given in the bottom line of the display.
The following system versions can be set here:
GenPure Standard, GenPure UV, GenPure UF, GenPure UV/UF, GenPure UV/TOC, GenPure
UV/TOC/UF, LabTower EDI, LabTower TII.
The serial number consists of six numerals and a slash. Use the arrow buttons to enter the settings, as
for other settings.
After entering the OEM menu press the menu-button 3 times then the display shows:
Switching units
In this menu, a choice is given as to whether measured values are to be displayed in the conductivity
unit or the specific electric resistance unit.
Basic setting: Conductivity
After entering the OEM menu press the menu-button 4 times then the display shows: