Thermo Scientific Barnstead GenPure xCAD Plus System Operating Instructions Manual Download Page 5

Page: 5 / 128

Preface

Explanatory notes on the operating instructions

Thermo Scientific

GenPure

Explanatory notes on the operating instructions

EU Mark of Conformity

CSA - admission

Indicates a situation which, if not avoided, could result in damage to equipment or
property.

Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injuries.

Indicates a hazardous situation which, if not avoided, will result in death or serious
injuries.

General information! Particularly important notes are marked with this information
sign.

Risk of electric shock! Electrical work on the system is only to be carried out by qualified personnel.

Protective conductor connection.

Connect the power supply to an electrical socket with a protective connection.

Indicates a situation where protected gloves or clothing is needed.

Indicates a situation in which protective goggles must be worn.

Summary of Contents for Barnstead GenPure xCAD Plus System

































































































































Search results

Summary of Contents for Barnstead GenPure xCAD Plus System

Reviews:

Related manuals for Barnstead GenPure xCAD Plus System

Brands by name

Popular brands

Thermo Scientific Barnstead GenPure xCAD Plus System, Operating Instructions Manual

Search results

Summary of Contents for Barnstead GenPure xCAD Plus System

Reviews:

Related manuals for Barnstead GenPure xCAD Plus System

Brands by name

Popular brands