Operation
Range Menu
3-12
Model 410
i
Instruction Manual
Thermo Fisher Scientific
high range low point. This will ensure that the high and low range
concentration curves will overlap. If both of these methods are
unacceptable due to local regulations, then the dual range mode should be
used so that the range selection may be evaluated by the user to meet their
reulations.
▲
Figure 3–6.
Analog Output in Auto Range Mode
By default, in the auto range mode, the analog outputs are arranged on the
rear panel connector as shown in
Figure 3–7
. See
Table 3–4
for channels
and pin connections. Auto range mode may be selected from the “
Range
Mode Select
” on page
3-78
.
Figure 3–7.
Pin-Out of Rear Connector in Auto Range Mode
