C-Link Protocol Commands
Datalogging
B-24
Model 410
i
Instruction Manual
Thermo Fisher Scientific
Send:
lrec
layout
Receive:
lrec layout %s %s %lx %f %f %f %f
t
D
L
ffff
s/r
pres
intensity
motor
lrec mem size
srec mem size
These commands report the number of lrecs and srecs that can be stored
with the current settings and the number of blocks reserved for lrecs and
srecs. The example that follows shows that 1075 blocks were reserved for
lrecs and the maximum number of lrecs that can be stored in memory is
241979. Memory allocation can be changed using the malloc command.
Send:
lrec mem size
Receive:
lrec mem size 241979 recs, 1075 blocks
lrec per
srec per
These commands report the lrecs and srecs logging period. The following
example shows that the srec logging period is 5 minutes.
Send:
srec
per
Receive:
srec per 5 min
set srec per
value
set srec per
value
value
= | 1 | 5 | 15 | 30 | 60 |
These commands set the lrecs and srecs logging period to
value
in minutes.
The following example sets the lrec logging period to 15 minutes.
Send:
set lrec per 15
Receive:
set lrec per 15 ok
no of lrec
no of srec
These commands report the number of lrecs and srecs stored memory. The
following example shows that 50 lrecs have been stored in the memory.
Send:
no of lrec
Receive:
no of lrec 50 recs
malloc lrec
malloc srec
These commands report the currently set memory allocation for lrecs and
srecs in percent of total memory.
Send:
malloc
lrec
Receive:
malloc lrec 10 %
