Thermo King SB-210, Manual

Page: 53 / 159

Operating Instructions
53
Datalogger Menu
The SR-2 controller is equipped with datalogging
capability. Datalogging can store trip information
for later use. A “Start of Trip” is initiated to
accurately store information,.
Trip data is logged as follows:
ServiceWatch™:
ServiceWatch is standard
equipment. It is an integrated datalogging system
that records operating events, alarm codes and
compartment temperatures as they occur and at
preset intervals.
CargoWatch™:
CargoWatch is an optional
datalogger system that logs data of up to six
temperature sensor/probes, four door switches,
humidity sensor, data averaging, and
programmable, temperature out of range alarms.
Initiating a Start of Trip
A “Start Of Trip” places a marker in the
datalogger memory. A Start Of Trip can be
initiated through the use of WinTrac datalogging
software, or manually in the field. The following
procedure covers manual initiation. For more
information on datalogging, see the WinTrac
Datalogging Software Operating Manual.
1. Start at the Standard Display. If the
Temperature Watch Display is showing, press
the
M
ENU
soft key once to return to the
Standard Display. See Figure 39.
2. Press the
M
ENU
soft key on the Standard
Display.
3. Press the
N
EXT
soft key until the Datalogger
Menu appears. See Figure 40.
4. Press the
S
ELECT
soft key on the Datalogger
Menu. The “Start Trip” Screen will appear.
5. Press the
S
ELECT
soft key. The “Start Of Trip”
Screen will appear.
6. Press the
S
ELECT
soft key to initiate a start of
trip.
7. A Start Of Trip Marker has been inserted into
the datalogger memory.
Printing a Trip Report
This procedure prints the current datalogger
record directly to a handheld printer. Only data
from the sensors connected to the HMI Cargo
Watch data logger can be printed. Graphs are not
available with a handheld printer.
1. Connect the printer to the printer port in the
control box.
2. Start at the Standard Display. If the
Temperature Watch Display is showing, press
the
M
ENU
soft key once to return to the
Standard Display. See Figure 39.
3. Press the
M
ENU
soft key on the Standard
Display.
4. Press the
N
EXT
soft key until the Datalogger
Menu appears. See Figure 40.
5. Press the
S
ELECT
soft key on the Datalogger
Menu. The “Start Trip” Screen will appear.
6. Press the
N
EXT
soft key. The “Print/View”
Screen will appear.
7. Press the
S
ELECT
soft key. The “Delivery
Ticket” Screen will appear. Press the
S
ELECT
soft key to print a delivery report.
8. Press the
N
EXT
soft key to go to the “Trip
Ticket” Screen. Press the
S
ELECT
soft key to
print a trip report.
1. Menu Soft Key
Figure 39: Standard Display
1