Thermo King SB-210, Manual

Page: 41 / 159

Operating Instructions
41
Standard Display
The Standard Display is the default display. It
appears if no other display function is selected.
The Standard Display shows the box temperature
and setpoint. The box temperature is measured by
the controlling sensor. This is usually the return
air sensor. The box temperature shown below in
Figure 18 is 35.5 F. The setpoint shown is 35 F.
The top of the display shows the unit is operating
in the CYCLE-SENTRY mode. The arrow
pointing down indicates the unit is cooling.
Temperature Watch Display
The Standard Display defaults to the Temperature
Watch Display after about 2-1/2 minutes of
non-use (when no keys are pressed). The
Temperature Watch Display shows the same box
temperature and setpoint but in larger fonts. This
creates easy operator viewing from a distance. To
return to the Standard Display press the
M
ENU
soft
key (or any of the other three soft keys that are not
assigned).
Standard Display Variations
The Standard Display has variations. A display
showing any of the following variations is still
considered a Standard Display.
The top of the display will show that the unit is
operating in either CYCLE-SENTRY or
Continuous Mode. It may also display a
service/alarm message. The temperature can be
displayed in degrees Fahrenheit (F) or degrees
Celsius (C). See Figure 20. An arrow pointing
upwards indicates the unit is heating. An arrow
pointing downwards indicates the unit is cooling.
1. Box Temperature 3. CYCLE-SENTRY
2. Cooling 4. Setpoint
Figure 18: Standard Display
1. Temperature Watch Display
2. Menu Soft Key
Figure 19: Temperature Watch Display
1
4
3
2
1
2
1. Continuous or CYCLE-SENTRY
2. Heating
3. Degrees Celsius
4. Cooling
5. Service/Alarm Message
6. Degrees Fahrenheit
Figure 20: Standard Display Variations
3
2
1
5
6
4