Thermo King SB-210, Manual

Page: 44 / 159

Operating Instructions
44
Selecting CYCLE-SENTRY or
Continuous Mode
When CYCLE-SENTRY mode is selected the unit
will start and stop automatically to maintain the
setpoint, keep the engine warm, and the battery
charged. When Continuous mode is selected, the
unit will start automatically and run continuously
to maintain setpoint and provide constant airflow.
Complete the following steps to change modes:
NOTE: The mode can also be changed using the
Mode Menu Screen in the Operator Menu. See
“Selecting CYCLE-SENTRY or Continuous
Mode” on page 56.
1. Press the
M
ODE
key. See Figure 23.
2. The “Programming Continuous Mode” or
“Programming CYCLE-SENTRY Mode”
Screen briefly appears. See Figure 24 and
Figure 25.
3. The “New System Mode is Continuous”
Screen or the “New System Mode
CYCLE-SENTRY” Screen briefly appears.
See Figure 24 and Figure 25.
4. The Standard Display appears and the bar on
top of screen reads the new mode. See Figure
24 and Figure 25.
5. Press the
M
ODE
key again to change the unit
back to the previous mode.
Figure 24: Screen Sequence for Changing from
CYCLE SENTRY Mode to Continuous Mode
Figure 25: Screen Sequence for Changing from
Continuous Mode to CYCLE-SENTRY Mode
1. Shows Mode Selected
2. Mode Key
Figure 23: Changing Mode
1
2