Texmate, Inc. Tel. (760) 598-9899 • www.texmate.com
Page 44
Apr-21-2016 DI_602A 320 DS (NZ313)_April 2016
WARRANTY
Texmate warrants that its products are free from defects in material and workmanship under
normal use and service for a period of one year from date of shipment. Texmate’s obligations
under this warranty are limited to replacement or repair, at its option, at its factory, of any of
the products which shall, within the applicable period after shipment, be returned to Texmate’s
facility, transportation charges pre-paid, and which are, after examination, disclosed to the sat-
isfaction of Texmate to be thus defective. The warranty shall not apply to any equipment which
shall have been repaired or altered, except by Texmate, or which shall have been subjected
to misuse, negligence, or accident. In no case shall Texmate’s liability exceed the original pur-
chase price. The aforementioned provisions do not extend the original warranty period of any
product which has been either repaired or replaced by Texmate.
USER’S RESPONSIBILITY
We are pleased to offer suggestions on the use of our various products either by way of printed
matter or through direct contact with our sales/application engineering staff. However, since
we have no control over the use of our products once they are shipped, NO WARRANTY
WHETHER OF MERCHANTABILITY, FITNESS FOR PURPOSE, OR OTHERWISE is made
beyond the repair, replacement, or refund of purchase price at the sole discretion of Texmate.
Users shall determine the suitability of the product for the intended application before using,
and the users assume all risk and liability whatsoever in connection therewith, regardless of any
of our suggestions or statements as to application or construction. In no event shall Texmate’s
liability, in law or otherwise, be in excess of the purchase price of the product.
Texmate cannot assume responsibility for any circuitry described. No circuit patent or software
licenses are implied. Texmate reserves the right to change circuitry, operating software, speci-
fications, and prices without notice at any time.
For product details visit www.texmate.com
Local Distributor Address
450 State Place • Escondido, CA 92029
Tel: 1-760-598-9899 • USA 1-800-839-6283 • That’s 1-800-TEXMATE
Fax: 1-760-598-9828 • Email: [email protected] • Web: www.texmate.com
Texmate has facilities in Japan, New Zealand, Taiwan, and Thailand.
Case Dimensions
Clear Lockable
NEMA 4X
Splash Proof Cover
P/N:(OP-N4/96x48)
The 96x48mm case is
particularly suitable for
mounting in mosaic panels
or insulative panels up to 2"
thick. They can also stack
mount, 2 up in existing
cutouts for 1/4 DIN
(96x96mm) or 4 up in
1/2 DIN (96X192mm).
Prog.
SP1
SP1
SP2
SP4
SP3
SP5
SP6
Prog.
SP1
SP1
SP2
SP4
SP3
SP5
SP6
96 mm
(3.78")
48 mm
(1.89")
3.9 mm
(0.15")
typical
FRONT VIEW
1/8 DIN 96x48mm
Prog.
SP1
SP1
SP2
SP4
SP3
SP5
SP6
NOTE: The Metal Surround Case
is pre-installed at the factory and
cannot be removed without
damage to the case.
Metal Surround Case
P/N:(OP-MTL96X48) uses
Metal Screw Mount Clips
and has a max. panel
thickness mounting
of 15.5 mm (0.61").
Various bezel colors
are available.
Black is standard.
Pro
g.
SP3
SP5
SP6
SP1
SP4
SP2
When extra panel mounting tightness
is required, order the optional
screw mount clip
. P/N:(OP-MTLCLIP)
Panel adaptor
plates are
available to
retrofit most
existing panel
cutouts.
For additional strength,
extra Mounting
Slide Clips
can be ordered and doubled up
one behind the other. P/N: (75-DMTCLIPF)
TOP VIEW
87.4mm
(3.45")
mosaic
fitting
95.4mm
(3.77")
Max. panel thickness
50mm
(1.97")
96 mm
(3.78")
91.6mm
(3.6")
DIN
Cutout
Spacer
To open rear cover,
use a small flat
bladescrew driver.
Press down lightly to
release catch on top
or bottom of case
and leaver outwards.
4.7mm
(0.19")
DIN Cutout Spacer
2mm
(0.08")
Connector
Socket
These dimensions are
increased by 1.6mm (0.06")
when the
metal surround
case
is installed.
PANEL CUTOUT
Case will mount in standard 1/8 DIN cutouts
45 mm
(1.77")
Snug Fitting
Mosaic Fitting
92 mm
(3.62")
Loose Fitting
91.6mm
(3.6")
40.8mm
(1.61")
8 places
3mm
(0.12")
8 places
4mm
(0.16")
43.4mm
(1.71")
1/8 DIN
Cutout spacers
87.4mm
(3.45")
40.8 mm
(1.61")
117 mm
(4.61")
SIDE VIEW
5.3 mm
(0.21")
3.7mm
(0.15")
43.4 mm
(1.71")
DIN Cutout spacers
Straight-thru Connector
for meters with output
board 20mm (0.79")
Right-angled Connector
11.8mm (0.47")
For extra strength in portable applications, the 8 DIN
spacers should be snipped off and the
Mosaic fitting
cutout used. Alternatively, the
High Strength
Panel
Mounting Kit
(Part # OP-PMA96X48) can be used.
Panel
Seal Frame
Bezel
Foam Seal Gasket
Seal Backplate
Panel Seal Section View
O Ring (039, x1/6")
Meter Case
Panel
96x48 Panel to Case Seal Adaptor Kit
P/N: OP-PMA96X48
Bezel
Seal Frame (Plastic)
O-Ring (039, x1/16")
Seal Backplate (Plastic)
Foam Seal Gasket
Removable
Key-lock
Safety
Catch
Cover
Base
O-ring
Gasket
Copyright © 2004-2016 Texmate Inc. All Rights Reserved.
