A
When in doubt, look it up
155
Menu items on the display
Depending on the functions you are currently using, the menu items for selecting
the next operating step appear. This overview contains all menu items, arranged
alphabetically.
If you want to accept a call.
You can sign up for the automatic call distribution. This function must be
enabled by the Tenovis Service.
You can change the volumes of the handset and loudspeaker during a call.
These changes are only valid during that connection.
Adjust the handset and loudspeaker volumes, the sound of various tones
and the contrast.
You can connect a variety of additional equipment such as a headset, han-
dsfree equipment, a DSS module or a PC via the AEI interface on the bot-
tom of the telephone. According to the configuration that is to be used, you
need to set one of three different modes of operation.
Adjusting the signal tone volume.
AT commands:
This mode of operation makes your phone act like a
modem that can be controlled with AT commands. Only the telphone is
controlled. Data is not transferred to the other subscriber. Three additional
menu items are available, with which you can set the Baud rate, data bits
and parity.
Y ETSI AT
You can connect a PC to the AEI interface on the bottom of the
telephone. In order to do this you need to set the AEI mode of operation to
”Y ETSI AT”.
i
•
Functions which are labeled with
-
are not installed as standard on your phone.
Accept call
ACD functions
-
Adjust volume
Adjust ac contrast setting
AEI mode of operation
Alerting tone volume
