Using the telephone with Multiline
80
Using the telephone with Multiline
-
Initiating refer--back
During a call:
Initiate refer--back. The caller is waiting.
...
Enter the number of the subscriber whom you want to consult. Once
the refer--back subscriber has answered the call, you can initiate a conference (see
Page 29).
Initiating a conference via the phone lines
Setting up a conference via phone lines is only possible if an active connection and
a connection on hold have been made.
Press the function key ”Conference”.
Press the line key of the connection on hold (must happen within 3 seconds).
i
•
You can set up your telephone in such a way that you only have to press the
destination key (not the line key) of the subscriber whom you would like to
consult. That subscriber is called immediately, without your having to press the
”Refer--back” key.
•
No Multiline functions are available during a consultation or conference. The
following functions are thus
not
possible during a refer--back connection or
conference:
-- manual hold,
-- retrieve waiting subscriber,
-- pick up a call from another line,
-- occupy a new line.
In these cases, an info window will appear with the message ”Function not
possible”. The Multiline functions are completely usable again when the
consultation or refer--back is ended.
•
For more information on assigning function keys, see Chapter ”Setting
function keys” on Page 97.
