When in doubt, look it up
154
Display during emergency operation
In case of a power outage your telephone is automatically set to emergency oper-
ation. This will change some of the function settings. Depending on the setting, cer-
tain functions, such as handsfree, are blocked. If the display is not deactivated, the
corresponding messages will be displayed in it.
Overview of messages
Your telephone has switched itself to emergency operation. The AEI inter-
face is blocked. Connected equipment, such as a DSS module, can then
no longer be used.
Your telephone has switched itself to emergency operation after a power
outage.
Your telephone has switched itself to emergency operation. The displayed
function, e.g. call monitoring, is blocked.
To reduce the power consumption, loudspeakers and microphones are
switched off. You can no longer use the handsfree mode, whereas call
monitoring is still possible.
To reduce the power consumption, loudspeakers and microphones are
switched off. You can no longer use the call monitoring and handsfree
modes.
If the loudspeaker has been turned off, then this text informs you that you
can only use the telephone with the handset.
i
•
The previous functions are only available if additional telephones are connected
to your telephone.
•
Depending on the setting, the LED is turned off to reduce the power
consumption. A call diversion is then no longer displayed.
AEI off
Emergency operation.
Emergency operation...
Hands-free mode not possible
Monitoring not possible
Please use handset
