Tennant 235D User Manual Download

Page: 62 / 203

MAINTENANCE

235 MM331 (3--94)

3-26

BELTS AND CHAINS

HYDRAULIC PUMP BELT

The hydraulic pump belt transfers power from the

engine sheave to the hydraulic pump. Check belt

condition and tension after every 200 hours of

operation. The belt is properly tensioned when it

deflects 0.26 in (7 mm) from a force of 7 lb

(3 kg) applied at belt midpoint.

TO REPLACE AND ADJUST HYDRAULIC PUMP

BELT

1. Stop the engine and set the machine

parking brake.

FOR SAFETY: Before Leaving Or Servicing

Machine; Stop On Level Surface, Set Parking

Brake, Turn Off Machine And Remove Key.

2. Open the seat support.

3. Remove the vacuum fan and engine belt

guards.

4. Loosen the pump plate mounting and

adjustment bolts.

03498

HYDRAULIC PUMP

A. Hydraulic Pump

B. Pump Plate

C. Adjustment Bolts

D. Mounting Bolts

5. Slide the pump assembly backward to

remove the belt. Position the new pump belt

on the sheaves.

6. Push the pump forward keeping the sheaves

aligned and snug the mounting bolts.

7. Check belt tension. If it meets specification,

tighten the bolts. If not, repeat the steps.

04233

CHECKING BELT TENSION

A. Hydraulic Pump Belt

8. Replace belt guards.

9. Lower the seat support.

VACUUM FAN BELT

The vacuum fan belt transfers power from the

pump sheave to the vacuum fan and the

accessories pump. Check the belt condition and

tension after every 200 hours of operation. The

belt is properly tensioned when the belt deflects

0.25 in (6 mm) from a force of 6 lb (3 kg) applied

at belt midpoint.

TO REPLACE AND ADJUST VACUUM FAN
BELT

1. Stop the engine and set the machine

parking brake.

FOR SAFETY: Before Leaving Or Servicing

Machine; Stop On Level Surface, Set Parking

Brake, Turn Off Machine And Remove Key.

2. Open the seat support.

Summary of Contents for 235D












































































































































































































Search results

Summary of Contents for 235D

Reviews:

Related manuals for 235D

Brands by name

Popular brands

Tennant 235D, User Manual

Search results

Summary of Contents for 235D

Reviews:

Related manuals for 235D

Brands by name

Popular brands