Tennant 235D User Manual Download Page 5

Page: 5 / 203

ABOUT THIS MANUAL

235 MM331 (3--93)

SUPPLIER COMPONENT BREAKDOWNS
TENNANT purchases certain components of the

machine from suppliers. Some of these

components are engines, hydraulic pumps and

motors, electric motors, and solution pumps.

For those purchased components that are

repairable, lists of parts for them appear in the

later part of the parts sections. These are the

supplier breakdowns. The engine breakdown

contains both supplier and TENNANT parts

numbers for repair parts. Breakdowns for

hydraulic and electrical components have

TENNANT part numbers for the parts TENNANT

supplies. The serial numbers listed in any of the

parts lists in these sections is a serial number the

manufacturer uses to identify design changes in

their particular component.

ORDERING REPAIR PARTS

Once you have located a part to order, there are

several things you need to have to place the

order. At the beginning of each parts section is an

Ordering Repair Parts page which lists the

information you will need to place your order.

Review this list before placing the order.

Summary of Contents for 235D












































































































































































































Search results

Summary of Contents for 235D

Reviews:

Related manuals for 235D

Brands by name

Popular brands

Tennant 235D, User Manual

Search results

Summary of Contents for 235D

Reviews:

Related manuals for 235D

Brands by name

Popular brands