Tennant 235D User Manual Download Page 52

Page: 52 / 203

MAINTENANCE

235 MM331 (3--93)

3-16

ENGINE

ENGINE LUBRICATION

Check the engine oil level daily.

Change the engine oil and oil filter after the first

35 hours of operation and then after every

75 hours of operation. Use a straight SAE

20-weight, API class CD engine oil when ambient

temperatures range from 32 to 77

F (0 to 25

C).

Use a straight SAE 30-weight, API class CD

engine oil when ambient temperatures are above

F (25

C). If multiviscosity oil is preferred, use

SAE 10W-30 weight, API class CD engine oil for

all temperatures.

The engine oil capacity is 3.2 qt (3 L).

03509

DIPSTICK AND FILL CAP

A. Dipstick

B. Fill Cap

COOLING SYSTEM

Maintaining cooling system efficiency is important.

Engine temperatures must be brought up to and

maintained within the satisfactory range for

efficient operation. However, the engine must be

kept from overheating in order to prevent damage

to the valves, pistons, and bearings. Check the

radiator coolant level after every 75 hours of

operation. Fill the cooling system through the

coolant overflow tank, not through the radiator.

03508

COOLANT TANK

A. Tank

Summary of Contents for 235D












































































































































































































Search results

Summary of Contents for 235D

Reviews:

Related manuals for 235D

Brands by name

Popular brands

Tennant 235D, User Manual

Search results

Summary of Contents for 235D

Reviews:

Related manuals for 235D

Brands by name

Popular brands