Tennant 235D, User Manual

Page: 30 / 203

OPERATION
235 MM331 (3--93)
2-12
TO STOP MACHINE
1. Return the directional pedal to the “neutral”
position. Apply the brake.
2. Push the main brush lever into the “UP”
position.
3. Pull the side brush lever back into the
“Raised”position.
4. Pull the side brush and hopper lever into the
“LOWER”position to stop the side brush.
5. Set the machine parking brake.
6. Pull the throttle control lever in the “STOP”
position.
7. Turn the key-operated ignition switch key to
the “OFF”position. Remove the key from
the ignition switch.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, Set Parking
Brake, Turn Off Machine And Remove Key.
POST OPERATION CHECKLIST -- ENGINE
STOPPED
Check the skirts for damage, wear, and
adjustment.
Check for wire or string tangled on the brushes.
Check for leaks.
TO ENGAGE HOPPER SUPPORT BAR
WARNING: Raised Hopper May Fall.
Engage Hopper Support Bar.
1. Set the machine parking brake.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, Set Parking
Brake, Turn Off Machine And Remove Key.
2. Raise the hopper.
3. Position the hopper support bar on the bar
stand.
B
A
03369
HOPPER SUPPORT BAR STAND
A. Bar Stand
B. Support Bar