Tennant 235D, User Manual

Page: 139 / 203

OPTIONS
6-3
235 MM331 (3--93)
ORDERING REPAIR PARTS
The components used in this machine have been
carefully selected for performance and safety. Use
only TENNANT specified or equivalent parts.
To receive prompt service in filling of your parts
orders, please direct all orders for parts with
TENNANT part numbers to the TENNANT, and all
orders for parts with vendor part numbers to the local
supplier of the respective vendor.
When ordering parts, please furnish all of the
following information:
1. Machine model number - shown on the machine
data plate.
SER.NO.
GVW. LBS. KG.
TENNANT COMPANY
MINNEAPOLIS, MINN USA
2. Machine serial number - shown on the machine
data plate.
3. Power source - gasoline, LPG, diesel, electric.
4. Company name.
5. Shipping address.
6. Billing address.
7. Name, first and last - of person ordering parts.
8. Telephone number.
9. Purchase order number.
10. Part number, description, and quantity - of each
item on the order.
11. Customer ID Number.
Do not order parts by key number or the figure
number of the illustrated parts. Indented items
indicate parts of assemblies. Standard hardware is
furnished only when part of a purchased assembly.
Please get hardware from a local hardware supplier.
If the old part cannot be identified, send it to us with
the quantity needed specified on the order.
Any claim for loss or damage to a shipment in transit
should be filed promptly against the transportation
company making the delivery. Shipments will be
complete unless the packing list or order ack-
nowledgement indicate items back ordered.
If parts received are suspected to be incorrect or
defective, please write, wire, or phone the TENNANT
representative from whom you ordered the part. They
will give authorization for return and/or handle
replacement shipments when required.
SERIAL NUMBER INFORMATION EXPLANATION
Serial number listings are shown to indicate on which
machines each part can be used. These listings are
explained by the following examples:
(000000-- ) The part can be used on all machines.
(003342-- ) The part can be used on all machines
beginning with the serial number listed.
(000000--004320) The part can be used on all
machines up to and including serial number listed.
(004321--005678) The part can be used on all
machines between and including the serial numbers
listed.
Where xxxxxx’s are listed in place of a serial number,
it indicates a change was made but the exact serial
number had not been established when the catalog
went to press.
SI UNITS OF MEASURE
(INTERNATIONAL SYSTEM)
Metric equivalents have been included, where
applicable, throughout this parts catalog.
FASTENER STRENGTH IDENTIFICATION
Fasteners required to have high--strength qualities
equivalent to SAE Grade 8 are identified throughout
this catalog by the description GR 8. Unless identified
by this description, all standard fasteners are SAE
Grade 5.
(Specifications and design subject to change without
notice.)