Tennant 235D User Manual Download Page 65

Page: 65 / 203

MAINTENANCE

3-29

235 MM331 (3--94)

3. Remove the vacuum fan and engine belt

guards.

03503

FAN BELT

A. Fan Belt

B. Alternator

C. Mounting Bolt

D. Engine Belt Guard

4. Loosen the pump plate mounting and

adjustment bolts.

03498

HYDRAULIC PUMP

A. Hydraulic Pump

B. Pump Plate

C. Adjustment Bolts

D. Mounting Bolts

5. Slide the pump assembly backward to

remove the belt.

6. Loosen the alternator mounting bolts.

7. Replace the fan belt.

8. Tighten the fan belt to specification.

04235

CHECKING BELT TENSION

A. Engine Fan Belt

B. Alternator

C. Mounting Bolt

9. Position the hydraulic pump belts back on

the sheaves.

10. Push the pump forward keeping the sheaves

aligned and snug the mounting bolts.

11. Tighten the pump belt as described in

REPLACE AND ADJUST HYDRAULIC

PUMP BELT

12. Replace the belt guards.

13. Lower the seat support.

Summary of Contents for 235D












































































































































































































Search results

Summary of Contents for 235D

Reviews:

Related manuals for 235D

Brands by name

Popular brands

Tennant 235D, User Manual

Search results

Summary of Contents for 235D

Reviews:

Related manuals for 235D

Brands by name

Popular brands