TEG1210P 10-Port Gigabit Intelligent PoE Switch User Guide
Enabled
switch will require re-authentication of client regularly
Reauthentication
Period
Configure the cycle of reauthentication, “3600” by default. The
value options available range from 1 to 3600 seconds
EAP Timeout
Configure EAP response timeout, 30 seconds by default. The
value options available range from 1 to 255 seconds
3.9.2 802.1x Port
To enter the page below, click the “802.1x Setting”—“802.1x Port" tabs.
This page allows you to configure 802.1x port authentication status.
Fields on the above page are described as below:
Field Description
Port
Switch’s Port ID/number
Admin State
Force Authorized; Force Unauthorized; Auto
Force
Re-authenticate
After it is clicked, the corresponding port will perform forced
re-authentication
Description of the three authentication modes
:
Force Authorized
:
port remains authorized and switch authentication end does not
actively initiate authentication
；
Force Unauthorized
:
the
port remains unauthorized and ignores authentication initiated
- 40 -
