TEG1210P 10-Port Gigabit Intelligent PoE Switch User Guide
2
．
To delete an added MAC address: click the corresponding “Delete” button in the
“Operation” column or the “Delete All” button.
3.7 RSTP Setting
3.7.1 RSTP Config
To enter the page below, click “RSTP Setting”—“RSTP Config”.
To configure STP function, enter parameter values and click the “Apply” button.
Fields on the above page are described as below:
Field Description
System
Priority
Configure the system priority in STP function; the smaller this
configured value is, the more likely it is for a switch to become a
root bridge
Hello Time
The time interval at which a switch transmits a BPDU packet, 2s by
default. The allowed value for configuration ranges from 1 to 10s
MAX Age
The max time for a bridge port to store configuration BPDU, 20s by
default. The allowed value for configuration ranges from 6 to 40s
Forward Delay The time between the listening state and learning state, 15s by
default. The allowed value for configuration ranges from 4 to 30s
STP Version
Select RSTP or STP. By default it is RSTP
- 34 -
