TEG1210P 10-Port Gigabit Intelligent PoE Switch User Guide
rates. “No limit” means “not controlled”. You can configure a specific storm rate; just
remember to click the “Apply” button to activate your setting. When a corresponding
traffic exceeds the configured value, system will drop some excessive frames to reduce
the traffic into a reasonable range, thus effectively controlling various storms, avoiding
network congestion and ensuring normal processing of traffic.
Fields on this page are described as below:
Field Description
Broadcast Rate The permitted rate for broadcast packets to pass through the
switch
Multicast Rate
The permitted rate for multicast packets to pass through the
switch
Unknown
Unicast Rate
The permitted rate for unknown unicast packets to pass through
the switch
3.3.5 Statistics
To enter port statistics interface, click “Port Management”
→
“Statistics” as shown below.
This page displays RX/TX packet counts, TX/RX byte counts and RX/TX error packet
counts
To delete port statistic data, click the “Clear” button.
To refresh the statistic data, click the “Renew” button.
Fields on the above page are described as below:
- 20 -
