TEG1210P 10-Port Gigabit Intelligent PoE Switch User Guide
- 5 -
Chapter 1 Product Introduction
TEG1210P, a 10-Port Gigabit Intelligent PoE Switch, provides 8 10/100/1000Mbps
auto-negotiation RJ45 ports that support Auto MDI/MDIX and implement wire speed
forwarding. All its RJ45 ports support PSE PoE feature and IEEE 802.3af to auto-identify
an IEEE 802.3af-compliant device and power it via a network cable at the maximum
power of 15.4W supported by a single port. Besides, with the 2 provided independent
SFP ports, users can flexibly extend their network from 100 meters to over 80 kilometers.
In addition, TEG1210P supports port mirroring, port bandwidth control, port based/tagged
VLAN, trunk, static MAC address table, QoS, port authentication, port traffic statistics and
power save mode, etc.
The switch is a user-friendly, plug-and-play device without need for configuration. It
extends family and office network without being restricted by the spatial distribution of
cable.
1.1 Product Features
z
Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE 802.3af
Ethernet standards
z
Provides 8 10/100/1000Mbps auto-negotiation RJ45 ports that support
Auto-MDI/MDIX and auto-negotiation on duplex mode and transmission rate
z
8 RJ-45 ports provide PoE PSE function Supports IEEE 802.3af standard and can
work as a PSE to automatically power a device via a network cable at the
maximum power of 15.4W supported on a single port
z
2 independent SFP ports
z
Adopts Store & forward scheme and is integrated with a 8K MAC address table
with MAC address learning and auto-aging supported
z
Supports port aggregation
（
Trunk
）
and provides 3 trunk groups each of which is
allowed to include a maximum of 4 member ports
