TEG1210P 10-Port Gigabit Intelligent PoE Switch User Guide
them; if they pass the authentication, they can access resources of the LAN, and
otherwise, they can not. This protocol mainly solves the problems of authentication and
security in Ethernet.
3.9.1 802.1x Setting
To enter the page below, click the “802.1x Setting”—-“802.1x" tabs.
Enter the needed parameters for 802.1x configuration on the above page and click
“Apply” to activate your settings.
Fields on the above page are described as below:
Field Description
802.1x Enabled
Check to enable or uncheck to disable 802.1X function on the
switch’s ports
Radius IP
The IP address of the authentication server
RADIUS UDP Port Set the authentication UDP port of the switch, 1812 by default
RADIUS Key
Configure this value according to the secret key corresponding
to the authentication server
Reauthentication
Enable or disable re-authentication; if this feature is enabled,
- 39 -
