TEG1210P 10-Port Gigabit Intelligent PoE Switch User Guide
3.4.2 Trunk Config
1. Overview
Port aggregation refers to the binding of several ports together to form an aggregation
group where all member ports share the traffic, thus connectivity reliability and bandwidth
are boosted.
2. To configure the aggregation port
To enter the page below, click “Function Setting”—“Trunk Config".
The switch supports a maximum of 3 trunk groups. To configure a trunk group, select some
ports to add to the corresponding group (1/2/3) and a trunk arithmetic choice; then click the
“Apply” button.
Fields on the above page are described as below:
Field
Description
Normal
A port that does not join a trunk group is regarded as a normal port.
By default, all ports are normal ports
Group
1/2/3
Selected ports for a trunk group which is allowed to have a maximum
of 4 ports and a minimum of 2 ports
Trunk
Arithmetic
Choice
Supports source (MAC) address, destination (MAC) address and
source & destination (MAC) address; By default, the algorithm is
based on source and destination MAC address
- 24 -
