TEG1210P 10-Port Gigabit Intelligent PoE Switch User Guide
you can log in to its web based configuration page to manage
the device
Subnet Mask
Switch’s subnet mask value: 255.255.255.0 by default
Gateway
Gateway IP address: 0.0.0.0 by default
MAC Address
The switch’s physical address
ARL Aging Time
Switch’s aging time of the MAC address, 300 s by default
3.3 Port Management
3.3.1 Port Config
To enter the interface below, click “Port Management”
→
“Port Config” as shown below.
To configure a port, click the “Port” drop-down list box and select a number (for example
1). After you finish the needed configurations, click “Apply” to activate them.
Fields on the above page are described as below:
Field Description
Port
The port number corresponding to that on switch’s panel
Admin-Enable/
Disable
Allows you to configure to “Enable” or “Disable” a port. If “Disable”
is selected, then the corresponding port can not be used (Note:
DO NOT disable a port unless for some special needs)
Auto-negotiate Enable or disable port auto-negotiation function. By default, it is
enabled on all ports
- 16 -
