TEG1210P 10-Port Gigabit Intelligent PoE Switch User Guide
Chapter 2 Hardware Installation
2.1 Package Contents
Please verify the contents to the following after you open the package:
1. One switch
2. One AC power cord
3. One pair of l-shaped brackets and matched screws
4. 4 rubber cushions
5. One user manual
(The above listed items are for reference only; for actual contents, refer to the physical
articles in the final package)
2.2 Hardware Installation Description
1. To horizontally set the Switch on an operation desk, follow instructions below:
Correctly attach the four included rubber cushions to the 4 corresponding positions on the
bottom of the switch, and then place the switch horizontally on a stable and solid
operation desk. Make sure there is sufficient ventilation as shown in the below figure:
Setting the switch on an operation desk
2. To mount the Switch in a rack, follow instructions below:
The switch is designed for a standard-sized 19-inch rack and can be mounted into an
EIA-compliant standard rack.
Attach the 2 included brackets to each side of the switch and fix it with screws, and then
place it horizontally in a layer of the rack and fix it in the rack with screws as shown in the
figure below:
- 8 -
