TEG1210P 10-Port Gigabit Intelligent PoE Switch User Guide
d
efinitions are described in details in the table below:
LED Color
Status Description
Always ON Switch has power.
Power Green
OFF
Switch has no power, please check whether AC
power supply is correctly connected to switch or not
Always ON Valid link
Flashing Data
being
transmitted
Link/Act Green
OFF
No link on ports or incorrect link
Always ON 1000Mbps
Speed Green
OFF
10/100Mbps or disconnected
Always ON Switch works correctly
SYS Green
OFF
Switch is starting or being initialized
Always ON The corresponding port is supplying power
PoE Green
OFF
The corresponding port is not supplying power
Always ON Valid link on SFP port
SFP Green
OFF
No link on SFP port
Reset Button:
The Reset button is located under the Power LED on the switch’s front panel and can be
used to clear current configurations and restore factory default values.
How to use the Reset button:
To restore factory defaults, press and hold the button for
more than 5 seconds when switch functions correctly. Switch will automatically restore
factory defaults. And when the SYS LED re-lights up, it indicates the switch has been
rebooted and applying factory default settings.
Note:
Do NOT press this Reset button unless you want to have current configurations deleted.
2.4 Switch’s Back Panel
There is 1 AC POWER outlet and a switch in the back panel as shown in the below figure.
Switch’s Back Panel
- 10 -
