Important Compliance and Safety Information
9
PRISM MPS Installation and Safety Instructions
Safety
EN 61010-1: 2010 + A1
: Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 1: General Requirements Low Voltage Directive
2014/35/EU
Emissions
EN 55032: 2015 + A11: 2020
, CISPR 32: 2015, EN 61000-3-2: 2014, EN 61000-3-3: 2013
Immunity
EN 55035: 2017
, EN 61000-4-2: 2009,
EN 61000-4-3: 2006 + A1: 2008 + A2: 2010, EN 61000-4-4: 2012,
EN 61000-4-5: 2014 + A1: 2017, EN 61000-4-6: 2014, EN 61000-4-8: 2010,
EN 61000-4-11: 2020
Environments: E2
Warnings
Warning! This is a Class A product. In a domestic environment, this product may cause
radio interference, in which case, the user may be required to take appropriate
measures.
Achtung! Dieses ist ein Gerat der Funkstorgrenzwertklasse A. In Wohnbereichen
konnen bei Betrieb dieses Gerates Rundfunkstorungen auftreten, in welchen Fallen der
Benutzer fur entsprechende Gegenmal3nahmen verantwortlich ist.
Attention! Ceci est un produit de Classe A. Dans un environnement domestique, ce
produit risque de creer des interferences radioelectriques, ii appartiendra alors a
l?utilisateur de prendre les mesures specifiques appropriees.
Notes:
1.
For Compliance with the EMC standards listed here, high quality shielded interface
cables should be used.
2.
Emissions which exceed the levels required by this standard may occur when this
equipment is connected to a test object.
Environmental Compliance
This section provides information about the environmental impact of the product.
Product end-of-life handling
Observe the following guidelines when recycling an instrument or component:
Equipment recycling
Production of this equipment required the extraction and use of natural resources. The
equipment may contain substances that could be harmful to the environment or
human health if improperly handled at the product's end of life. To avoid release of
such substances into the environment and to reduce the use of natural resources, we
