Installation
Connectors
35
PRISM MPS Installation and Safety Instructions
DP
Display Port output for external monitor. The output video format
is 1920×1080.
2
GPIO
15-pin, mini D-sub connector, for details see MPS-100/-200/-300
remote connector pin assignments and preset functions.
REF IN
Used for analog reference signals black burst and tri-level sync for
locking
REF OUT
Note:
This is a dual purpose pin that can be controlled in the UI to
set to
REF OUT or
PPS
•
REF OUT is a pass through of the REF IN.
•
PPS connector outputs a 1 PPS (pulse per second) signal when
the instrument is locked to a PTP reference. 3.3v drive. TTL com
-
patible.
AUX OUT
SDI output of the selected SDI, ST2022, or ST2110 input:
•
For Quad Link inputs (4K or 8K) the AUX OUT is link 1.
•
ST2110-20/30 inputs are supported.
1. Audio output is an 1/8-inch (3.5 mm) diameter port for a headset. It has connections for left and
right audio channels. Headset plugs that are an 1/8 inch and have an additional contact for a
microphone may not work because of the headphone ports are not set for the spacing
requirements of a third connection on the plug.
2. When connecting to an external monitor, a monitor with a 1920×1080 capable display works best
with the instrument.
Descriptions of labeled PRISM MPS-100 rear-panel connectors
Connector
label, symbol,
or end
Description
