Installation
Connectors
34
PRISM MPS Installation and Safety Instructions
Descriptions of labeled PRISM MPS-100 rear-panel connectors
Connector
label, symbol,
or end
Description
AC Input
Connector for an AC power source.
DC Input
Connector for a standard XLR DC power source:
Pin 1: negative voltage
Pin 2: not in use
Pin 3: not in use
Pin 4: positive voltage
Ethernet port is a standard RJ-45 connector for 10/100/1000Base-T
Ethernet cable.
Two USB 3.0 ports are for connecting a mouse and keyboard,
importing or exporting instrument presets, upgrading the
instrument firmware, or saving screen and stream captures.
Audio output (1/8 inch—3.5mm—line out) port is for headphones
to listen to the selected audio channel pair.
1
SDI1
SDI1 can operate in these modes:
•
Input only supporting SD, HD, 3G, or 12G signals
•
Quad Link 4K and 8K input when used in conjunction with SDI
inputs 1-4 (options MPDSP-FMT-4K and MPDSP-FMT-8K)
SDI2
SDI2 can operate in these modes:
•
Input only supporting SD, HD, 3G, or 12G signals
•
Quad Link 4K and 8K input when used in conjunction with SDI
inputs 1-4 (options MPDSP-FMT-4K and MPDSP-FMT-8K)
SDI3
SDI3 I/O can operate in these modes:
•
Input supporting SD, HD, 3G, or 12G signals
•
Quad Link 4K and 8K input when used in conjunction with SDI
inputs 1-4 (options MPDSP-FMT-4K and MPDSP-FMT-8K)
•
Output loop through of SDI1 input
SDI4
SDI4 I/O can operate in these modes:
•
Input supporting SD, HD, 3G, or 12G signals
•
Quad Link 4K or 8K input when used in conjunction with SDI
inputs 1-4 (options MPDSP-FMT-4K and MPDSP-FMT-8K)
•
Output loop through of SDI2 input
