Installation
Connectors
38
PRISM MPS Installation and Safety Instructions
SDI1
(EYE in 300 only)
SDI1 can operate in these modes:
•
Input only supporting SD, HD, 3G, or 12G signals.
•
Quad Link 4K and 8K input
when used in conjunction with SDI
inputs 1-4 (options MPDSP-FMT-4K and MPDSP-FMT-8K)
•
MPS-300 only: Eye diagram up to 12G for physical layer mea
-
surements, including automated measurements of 12G SDI eye
pattern parameters (option MPDSP-PHY).
SDI2
SDI2 can operate in these modes:
•
Input only supporting SD, HD, 3G, or 12G signals
•
Quad Link 4K and 8K input
links when used in conjunction
with SDI inputs 1-4 (options MPDSP-FMT-4K and MPDSP-
FMT-8K)
SDI3
SDI3 can operate in these modes:
•
Input supporting SD, HD, 3G, or 12G signals
•
Quad Link 4K and 8K input when used in conjunction with SDI
inputs 1-4 (options MPDSP-FMT-4K and MPDSP-FMT-8K)
•
Output loop through of SDI1 input
SDI4
SDI4 can operate in these modes:
•
Input only supporting SD, HD, 3G, or 12G signals
•
Quad Link 4K and 8K input when used in conjunction with SDI
inputs 1-4 (options MPDSP-FMT-4K and MPDSP-FMT-8K)
•
Output loop through of SDI2 input
10/25GE
SDI I/O
SFP module slots can be configured for IP or SDI applications.
•
10/25GE: Two optional SFP+ ports are for 10/25GE Ethernet
applications. See MP-SFP products for available modules.
•
SDI I/O (this configuration is for future functionality): Two
optional SFP+ ports can provide up to four SDI signal loop-
through outputs, up to 12G for future functionality.
DP
Display Port output for an external monitor. The output video
format is 1920×1080.
2
GPIO
15-pin, mini D-sub connector, for details see MPS-100/-200/-300
remote connector pin assignments and preset functions.
REF IN
REF IN is used for analog reference signals black burst and tri-
level sync for locking.
Descriptions of labeled PRISM MPS-300 rear-panel connectors
Connector label,
symbol, or end Description
