Teledyne ProEM Series, System Manual

Page: 40 / 162

40 ProEM System Manual Issue 3
Figure 4-1: Typical Adjustable C-Mount Adapter
4.5 Mounting the Adjustable C- to Spectroscopy-Mount Adapter
The adjustable C- to spectrograph-mount adapter allows you to move the camera
vertically at the exit plane of a Teledyne Acton Research Series spectrograph in order to
align the kinetics rows at the middle of the focal plane for the best spectral quality. The
adapter is mounted to the front of a ProEM camera and is secured to the camera by a
threaded insert screwed into the camera’s C mount opening. Refer to Figure 8 when
mounting the adapter to the camera.
Tools Required
• 0.050 inch Hex key
• 3/32 inch hex key
• Flat screwdriver
• Spanner wrench (1.17 inch/29.7 mm between 0.094 inch/2.38 mm diameter
holes)
Equipment
• Teledyne Acton Research Series Spectrograph with light source at entrance
port
• Kinetics Adapter
— SP-2150 and SP-2750 Spectrographs: Use the Model 7050-0107 adapter
— SP-2350 and SP-2550 Spectrographs: Use the Model 7050-0104 adapter
• Camera with C-mount nose
4
4
11-
012
6
_0
016