Teledyne ProEM Series, System Manual

Page: 28 / 162

28 ProEM System Manual Issue 3
2.9 Unpack the System
All required items should be included with the shipment. The ProEM system has been
manufactured according to the camera options specified at the time of purchase,
including the CCD window and coatings that were ordered.
When unpacking the system, examine the system components for any signs of shipping
damage. If there are any, notify Teledyne Princeton Instruments immediately and file a
claim with the carrier. Be sure to save the shipping carton for inspection by the carrier.
If damage is not apparent but system specifications cannot be achieved, internal
damage may have occurred in shipment.
Retain all original packing materials so that the ProEM system can be easily and safely
packaged and shipped to another location or returned for service if necessary. If
assistance is required at any time, contact Teledyne Princeton Instruments Customer
Support. Refer to
Contact Information on page 160 for complete information.
2.9.1 Verify Equipment and Parts Inventory
Verify all equipment and parts required to set up the ProEM system have been delivered.
A typical system consists of:
Accessories that may have been purchased include:
• External Shutter(s).
• ProEM Camera;
• Power Supply and Cable;
• Window Heater Cable;
• USB3 Interface Cable;
• MCX to BNC Adapter Cables
a
;
a. Length May Vary
• Certificate of Performance;
• Data Acquisition Software, including:
— Installation disk;
— Hardware Key