Telecommunications Techniques Corporation interceptor 147, Reference Manual, Page: 96 / 280

3
Setup Categories
3-54
INTERCEPTOR 147 2 Mbit/s and Data Analyzer
3.6.24 Program Recall
Use the Program Recall item to recall a setup from any of
the test instrument’s ten battery-backed memory locations
(0 through 9). When you recall a setup, the test instrument
is automatically configured to match that setup.
Program X RECALL?
To recall a SETUP configuration, perform the following
steps.
1. Move the cursor to the program number.
2. Press SELECT until the display shows the number
of the program you want to recall.
3. Move the cursor to RECALL?
4. Press SELECT.
As the test instrument recalls the SETUP configuration
that is stored under the number you specified, the display
shows the following message.
RECALLING
PROGRAM ....
The test instrument is automatically reconfigured to the
setup stored in the specified program.
3.6.25 Performance
Use the Performance item to specify whether you are
using a G.821 standard or an M.2100 standard. The
following selections are available for the Performance
item:
G.821
Select G.821 to use the CCITT Recommendation
G.821 performance analysis standard.