Telecommunications Techniques Corporation interceptor 147, Reference Manual, Page: 160 / 280

Remote Control
6-32
6
INTERCEPTOR 147 2 Mbit/s and Data Analyzer
SET:TSBYTE [“<8-bit string>” | ?]
Set Timeslot Byte (when pattern command/query
is TSBYTE).
SET:TSIDL [“<8-bit string>” | ?]
Set Timeslot Idle. command/query
SET:TX [ON | OFF | ?]
Set Transmitter. command/query
Used to turn the 2 Mbit/s Transmitter on or off (to conserve
power).
SET:TXAL:AIS [ON | OFF | ?]
Set Transmit Alarm AIS. command/query
SET:TXAL:FAS [ON | OFF | ?]
Set Transmit Alarm FAS. command/query
SET:TXAL:MFAS [ON | OFF | ?]
Set Transmit Alarm MFAS. command/query
SET:TXCLK [INT | REC | PPM-50 |PPM+100|
|PPM-100 | PPM+50| 2MREF | ?]
Set Transmit Clock. command/query
(Note: The PPM and 2MREF selections are valid only if
Option 147-1 is installed.)
SET:TXCOD [AMI | HDB3 | ?]
Set Transmit Coding. command/query
SET:TXMFAS [“<4-bit string> “ ]
Set Transmit MFAS Word. command/query
SET:TXNFAS [“<8-bit string>”]
Set Transmit NFAS Word. command/query
SET:VF_FREQ [300 to 3000 | ?]
Set the transmitted VF frequency. command/query