Telecommunications Techniques Corporation interceptor 147, Reference Manual, Page: 152 / 280

Remote Control
6-24
6
INTERCEPTOR 147 2 Mbit/s and Data Analyzer
SET:FRMG
[AUTO|MFASC|MFAS|FASC|FAS|UNFR| ?]
Set: Framing. command/query
SET:GCLK [INTRNL | INTF | ?]
Set Generator Clock. command/query
SET:HSTB [ON|OFF|CLEAR| ?]
Set Histogram Buffer. command/query
SET:HSTC
Clear the histogram buffer. command only
SET:HSTF?
Request how full the histogram buffer is. query only
Example:
>
SET:HSTF?
Requests how full the histogram
buffer is.
54
The histogram buffer is 54% full.
SET:HSTL [“<DD/HH:MM>”|”AUTO” |”END” | ? ]
Set the histogram length. command/query
Used to set (or request) the histogram’s length. You can
specify the amount of time, specifying values for the day,
hour, and minute, as follows:
DD 00 to 99
HH 00 to 23
MM 00 to 59
For more information (and a complete example), see the
SET:HSTM and SET:HSTS commands.
SET:HSTM [AUTO | MAN | ?]
Set the histogram mode. command/query
Used to set (or request) the histogram mode, which may be
automatic (AUTO) or manual (MAN). When set to
AUTO, you cannot use the SET:HSTL command until