Telecommunications Techniques Corporation interceptor 147, Reference Manual, Page: 121 / 280

5-5
5
Overview
INTERCEPTOR 147 2 Mbit/s and Data Analyzer
To create a Timed Print, use the following instructions.
1. Select the AUXILIARY setup category.
2. Set Auto Print to TIMED.
3. Set Time Interval to the desired value
Determine the desired time interval between
automatic Timed Prints in hours and minutes
(HH:MM).
5.5 AUTO PRINT — EVENT
An automatic Event Print is created whenever a specified
event occurs. The Print includes the name of the event, the
accumulated value of the event since the beginning of the
test, and the date and time that it occurred.
To create an Event Print, use the following instructions.
1. Select the AUXILIARY setup category.
2. Set Auto Print to EVENT.
3. Set Event(s) to act as the Event Print trigger.
Each Event Print lists all the error types, alarms,
and events that occurred during the second the
Event Print was triggered.
Two sample Event Prints follow.
EVENT PRINT 16:11:35 7-Jan-1994
HDB3 Loss 0 Patt Loss 0
FAS Loss 1 MFAS Loss 0
AIS Present NO
EVENT PRINT 16:11:35 7-Jan-1994
HDB3 Present YES Pattern Sync YES
MFrame Err 5 FAS Sync YES
MFAS Sync ON AIS Clear NO
MFAS Dist OFF MFAS Dist Clear