Telecommunications Techniques Corporation interceptor 147, Reference Manual, Page: 84 / 280

3
Setup Categories
3-42
INTERCEPTOR 147 2 Mbit/s and Data Analyzer
3.6.5 Adjacent FAS Errs
Use the Adjacent FAS Errs item to specify the number of
adjacent FAS errors (3, 2, or 1) that you want the transmitter
to transmit when you press ERROR INSERT. This feature
can be used to test the “loss of framing synchronization”
criterion used by 2 Mbit/s receivers.
3.6.6 Site ID
Use alphanumeric characters to create a unique 8-character
identification of the test site.
3.6.7 Result Print
Use the Result Print item to specify the type of Results
Print you want. (A Results Print is created whenever you
press RESULTS, or when Auto Print is set to TIMED.)
The following selections are available.
STD
Select STD for standard Results Prints which contain
all of the results accumulated by the test set. For a
sample Print, see Section 5, Using a Printer.
SUM
Select SUM for summary Results Prints which contain
the following key results:
Bit Errors MFAS Rate %EFS
BER CRC Rate %SES
Test Sec MFAS Rate %DEG MIN
Freq ppm CRC Rate AVAIL SEC
Code Rate MFAS Rate ERR SEC
FAS Rate Selected Timeslots
Use this selection to save printing time and paper. For
a sample Print, see Section 5, Using a Printer.