Telecommunications Techniques Corporation interceptor 147, Reference Manual, Page: 159 / 280

6-31
6
Remote Control
INTERCEPTOR 147 2 Mbit/s and Data Analyzer
SET:SCLK [NORMAL | INV | ?]
Set Send Data Clock Polarity. command/query
SET:SUBCH [1 | 2 | 3 | 4 | ?]
Select the 16K subchannel within a command/query
64K timeslot.
SET:SYNTH [50 to 2048000 | ?]
Set the synthesizer rate. command/query
SET:TERM [CRLF | LF | CR | ?]
Set Terminator. command/query
NOTE: When entering this command, you must terminate
the command with the previously-selected
termination character.
SET:TEST [2M | DATA | MUX | ?]
Set Test. command/query
SET:TIME [“<HH:MM>”]
Set Time. command only
Specify the time in the format shown, using a 24-hour
clock.
Example:
>
SET:TIME “23:59” Sets the time to be one
minute before midnight.
SET:TMINT [“<HH:MM>” | ?]
Set Time Interval (for TIMED Prints). command/query
SET:TMOD [2048K | VOICE | 64K | Nx64K |
Mx64K |?]
Set Test Mode (when Test is command/query
set to 2M).
SET:TMSL_CPLNG [ON | OFF | ?]
Set Timeslot Coupling. command/query