Tektronix WFM601, Service Manual

Page: 38 / 304

Installation
2–6
WFM 601 - Service Manual
If only one side of the rack adapter is used, a 1700F06 Blank Panel can be
inserted in the unused section. See Figure 2–5. The rack adapter and panel are
available through your local Tektronix field office or representative.
When only one instrument is mounted in the side-by-side adapter an accessory
drawer (1700F07) can be installed in the blank side of the cabinet. See
Figure 2–6.
1700F07
1700F05
Figure 2–6: 1700F05 Rack Mounting with a 1700F07 Utility Drawer
For applications such as consoles the instrument can be mounted with front
molding flush or protruding from the console. In both cases, allow approximate-
ly 3 inches of rear clearance for BNC and power-cord connections.
To mount the instrument safely, attach it to a shelf strong enough to hold its
weight. Install the mounting screws through the four 0.156-inch diameter holes
in the bottom of the 1700F00 cabinet. See Figure 2–7.
Custom Installation