Tektronix WFM601, Service Manual

Page: 53 / 304

Operating Instructions
WFM 601 - Service Manual
2–21
General Menu Information
The WFM 601 menus are almost self-explanatory. The next few paragraphs
describe the general techniques. To get started, press the appropriate MENU
button (on the far right of the front panel) to call up one of the on-screen menu
readouts.
Menu selections appear along the right side of the screen. Descriptive labels,
when present, appear in ITALIC text
.
Actual selections appear in Roman
(standard) text
,
with the current selection outlined. Use the five bezel buttons
along the right side of the CRT to change the selections.
Figure 2–15 shows the bezel controls and buttons.
VERT POS HORIZ POS
MENU
CLEAR
.7
.6
.8
.5
.4
.3
.2
.1
–.1
–.2
–.3
Tek
COMPONENT ANALOG 2% & 4% K
PB
100%
50%
FOCUS SCALE INTENSITY
Left
Center Right
BEZEL CONTROLS
BEZEL
BUTTONS
Figure 2–15: The CRT Menu, with the Bezel Controls and Buttons
The center three controls under the CRT are referred to as left, center, and right
bezel controls. Control functions vary with menu choice; a readout just above
each active knob shows its present function. The knobs are used as variable
analog controls to set values such as phase, amplitude, and intensity. The left
control is also used to scroll and select categories within the CONFIG
Multi-Use Bezel Controls
and Buttons