Tektronix WFM601, Service Manual

Page: 276 / 304

WFM 601 Serial Digital Component Monitor
10–1
Replaceable Mechanical Parts
This section contains a list of the components that are replaceable for the
WFM 601. Use this list to identify and order replacement parts. There is a
separate Replaceable Mechanical Parts list for each instrument.
Parts Ordering Information
Replacement parts are available from or through your local Tektronix, Inc., Field
Office or representative.
Changes to Tektronix instruments are sometimes made to accommodate
improved components as they become available and to give you the benefit of
the latest circuit improvements. Therefore, when ordering parts, it is important to
include the following information in your order.
Part number
Instrument type or model number
Instrument serial number
Instrument modification number, if applicable
If a part you have ordered has been replaced with a new or improved part, your
local Tektronix, Inc., Field Office or representative will contact you concerning
any change in part number.
Change information, if any, is located at the rear of this manual.
Using the Replaceable Mechanical Parts List
The tabular information in the Replaceable Mechanical Parts list is arranged for
quick retrieval. Understanding the structure and features of the list will help you
find all of the information you need for ordering replaceable parts.
The Mfg. Code Number to Manufacturer Cross Index for the mechanical parts
list is located immediately after this page. The cross index provides codes,
names, and addresses of manufacturers of components listed in the mechanical-
parts list.
Abbreviations conform to American National Standards Institute (ANSI)
standard Y1.1.
Chassis-mounted parts and cable assemblies are located at the end of the
Replaceable Electrical Parts list.
Cross Index–Mfr. Code
Number to Manufacturer
Abbreviations
Chassis Parts