Tektronix WFM601, Service Manual

Page: 34 / 304

Installation
2–2
WFM 601 - Service Manual
Mechanical Installation
REAR
6.130
BOTTOM SIDE
12.725
8.250
6.875
0.688
1.060
16.180
5.105
0.156 DIA
(4)
Figure 2–1: Dimensions of the 1700F00 Plain Cabinet
The cabinets available for this instrument not only provide necessary shielding
and protection against accidental electrical shock, but also provide internal
circuitry with protection against build up of dust. A supply of filtered, cooling
air is provided from the rear panel and exits through the cabinet vent holes.
Operation in air flow restricted environments may lead to excessive heat build
up.
All qualification testing for the WFM 601 was performed in a 1700F00 cabinet.
To guarantee compliance with specifications, the instrument should be operated
in a cabinet. The plain cabinet, 1700F00, is shown in Figure 2–1.
The optional 1700F00 cabinet is the basic element for all of the cabinets that fit
this instrument. The 1700F02 portable carrying case is an enhanced version of
this cabinet, as is the 1700F04 side-by-side rack mount assembly. All of these
cabinets are available from Tektronix. If you need one of these cabinets, contact
your nearest Tektronix field office or representative for assistance in ordering.
Cabinets