Getting Started
Firmware Updates Through the Internet
Update your TBS1000B’s
fi
rmware to take advantage of new features and bug
fi
xes. You can use the Internet and a USB
fl
ash drive to update your oscilloscope.
If you do not have access to the Internet, contact Tektronix for information on
update procedures.
Check the version of your
current
fi
rmware
1.
Power on the oscilloscope.
2.
For the TBDS1000B: Push
Utility
►
- more - page 1 of 2
►
System Status
►
Misc.
.
For the TBDS1000B-EDU: Push
Utility
►
- more - page 1 of 3
►
- more -
page 2 of 3
►
System Status
►
Misc.
.
3.
The oscilloscope displays the
fi
rmware version number.
Check the version of the
latest available
fi
rmware
1.
Open up a Web browser and go to www.tektronix.com/software.
2.
Enter “TBS1000B” in the search box.
3.
Scan the list of available software for the latest TBS1000B
fi
rmware. Check
the version number.
If the latest available
fi
rmware Is newer than that
on your TBS1000B, update
your product’s
fi
rmware
1.
Download the latest
fi
rmware from www.tektronix.com/software to your PC.
Unzip the
fi
les, if needed, and copy the designated
fi
rmware
fi
le into the root
folder of a USB
fl
ash drive.
2.
Insert the USB
fl
ash drive into the front-panel USB port on your oscilloscope.
3.
Push
Utility
►
- more - page 1 of 2
►
File Utilities
►
- more - page 1 of 2
►
Update Firmware
►
Update Firmware
It takes several minutes to update the
fi
rmware. Your oscilloscope will prompt
you when the update is complete. Do not remove the USB
fl
ash drive or power
off the oscilloscope until the
fi
rmware update is complete.
w w w . e k t
2
. c o m
Electronics
Katrangi
Trading