Reference
Options
Settings
Comments
Summary of the oscilloscope settings
System Status
Misc.
Displays model, manufacturer serial number, adapters
connected, GPIB setup address,
fi
rmware version, and other
information
Options
Rear USB Port: Computer, Auto,
Detect, Printer
Printer Setup
Changes the output setup
GPIB Setup
►
Address
Sets the GPIB address for the TEK-USB-488 adapter (See
page 67.)
Set Date and Time
Sets the date and time (See page 104.)
Error Log
Displays a list of any errors logged and the Power Cycle
count
This log is useful if you contact a Tektronix Service Center
for help.
Key Points
System Status.
Selecting System Status from the Utility Menu displays the menus
available for obtaining a list of control settings for each group of oscilloscope
controls.
Push any front-panel menu button to remove the status screen.
Options
Comments
Horizontal
Lists horizontal parameters
Vertical
Lists vertical parameters of channels
Trigger
Lists trigger parameters
Misc
Lists the model of the oscilloscope, the version number of the
software, and the serial number
Lists values of the communications parameters
Setting the Date and Time.
You can use the Set Date and Time menu to set the
clock date and time. The oscilloscope displays this information, and also uses it to
time stamp
fi
les written to a USB
fl
ash drive. The oscilloscope contains a built-in
nonreplaceable battery to maintain the clock settings.
The clock does not automatically adjust for seasonal time changes. The calendar
does adjust for Leap years.
Options
Comments
Date
Push the side-menu button and turn and push the multipurpose knob
to set the day, month, and year.
Time
Push the side-menu button and turn and push the multipurpose knob
to set the hour and minute.
w w w . e k t
2
. c o m
Electronics
Katrangi
Trading