USB Flash Drive and Device Ports
Using the Save Function of the Front-Panel Save Button
You can set the front-panel save button
to write data to the USB
fl
ash drive
as an alternative function. To set the function of the button to save data, access
the following options:
Save/Recall
►
Action - Save All
Utility
►
- more - page 1 of 2
►
Options
►
Printer Setup
Saves All to Files
The Saves All to Files option lets you save the current oscilloscope information
to
fi
les on the USB
fl
ash drive. A single Saves All to Files action uses less than
700 kB of space on the
fl
ash drive.
Before you can save data to the USB
fl
ash drive, you need to change the
front-panel Save button
to the alternative Save function. To do so, select the
Save/Recall
►
Save All
►
Print Button
►
Saves All to Files
option.
To save all the oscilloscope
fi
les to a USB
fl
ash drive, follow these steps:
1.
Insert a USB
fl
ash drive into the USB Flash Drive port.
2.
To change the folder designated as the current folder, push the
Select Folder
option button.
The oscilloscope creates a new folder within the current folder each time you
push the front panel Save button, and automatically generates the folder name.
3.
Set up the oscilloscope to capture your data.
4.
Push the Save button.
The oscilloscope creates a new folder on the
fl
ash drive and saves the screen
image, waveform data, and setup data in separate
fi
les in that new folder,
using the current oscilloscope and
fi
le format settings. The oscilloscope
names the folder ALLnnnn. (See page 92,
To see a list of the
fi
les created by the Saves All To Files function, access the
Utility
►
File Utilities
menu.
Source
File name
Ch(x)
FnnnnCHx.CSV, where nnnn is an automatically-generated
number, and x is the channel number
Math
FnnnnMTH.CSV
Ref(x)
FnnnnRFx.CSV, where x is the reference memory letter
Screen Image
FnnnnTEK.???, where ??? is the current
fi
le format
Settings
FnnnnTEK.SET
w w w . e k t
2
. c o m
Electronics
Katrangi
Trading
