Reference
Sine wave
Details
FFT
Converts the input time-domain signal into its frequency
components and displays the result as a graph of frequency
versus magnitude (spectrum). Refer to the
FFT
chapter
for more information
(See page 51,
Undo Autoset
Causes the oscilloscope to recall the previous setup
Square Wave or Pulse
When you use the Autoset function and the oscilloscope determines that the signal
is similar to a square wave or pulse, the oscilloscope displays the following
options:
Square wave or
Details
Multi-cycle square
Displays several cycles with appropriate vertical and
horizontal scaling; the oscilloscope displays Pk-Pk, Mean,
Period, and Frequency automatic measurements
Single-cycle square
Sets the horizontal scale to display about one cycle of the
waveform; the oscilloscope displays Min, Max, Mean, and
Positive Width automatic measurements
Rising edge
Displays the edge, and the Rise Time and Peak-to-Peak
automatic measurements
Falling edge
Displays the edge, and the Fall Time and Peak-to-Peak
automatic measurements
Undo Autoset
Causes the oscilloscope to recall the previous setup
Video Signal
When you use the Autoset function and the oscilloscope determines that the signal
is a video signal, the oscilloscope displays the following options:
Video signal options
Details
Fields
►
All Fields
Displays several
fi
elds and the oscilloscope triggers on any
fi
eld
Lines
►
All Lines
Displays one complete line with parts of the previous and
next line; the oscilloscope triggers on any line
Lines
►
Number
Displays one complete line with parts of the previous and
next line; use the multipurpose knob to select a speci
fi
c line
number for the oscilloscope to use as a trigger
Odd Fields
Displays several
fi
elds and the oscilloscope triggers only on
odd numbered
fi
elds
w w w . e k t
2
. c o m
Electronics
Katrangi
Trading