Reference
Default Setup
Push the
Default Setup
button to recall most of the factory option and control
settings, but not all. Appendix D lists the default settings that will be recalled.
Display
Push the
Utility
button and
Display
side-menu selection to choose how
waveforms are presented and to change the appearance of the entire display.
Options
Settings
Comments
Type
Vectors, Dots
Vectors
fi
ll the space between adjacent
sample points in the display
Dots display only the sample points
Persist
Off, 1 sec, 2 sec,
5 sec, In
fi
nite
Sets the length of time each displayed
sample point remains displayed
Format
YT, XY
YT format displays the vertical voltage in
relation to time (horizontal scale)
XY format displays a dot each time a sample
is acquired on channel 1 and channel 2
Channel 1 voltage or current determines the
X coordinate of the dot (horizontal) and the
channel 2 voltage or current determines the
Y coordinate (vertical)
Backlight
0 to 100%
Use the
Multipurpose
knob to adjust the
display backlight.
Depending on the type, waveforms will be displayed in three different styles:
solid, dimmed, and broken.
w w w . e k t
2
. c o m
Electronics
Katrangi
Trading