Operating Basics
6.
The trigger readout shows the trigger source, level, and frequency. Trigger
readouts for other trigger types show other parameters.
7.
The horizontal position/scale readout shows the main time base setting (adjust
with the
Horizontal Scale
knob).
8.
The channel readout shows the vertical scale factor (per division) for each
channel. Adjust with the
Vertical Scale
knob for each channel.
9.
The waveform baseline indicator shows the ground reference points (the
zero-volt level) of a waveform (ignoring the effect of offset). The icon colors
correspond to the waveform colors. If there is no marker, the channel is not
displayed.
Message Area
The oscilloscope displays a message area at the bottom of the screen that conveys
the following types of helpful information:
Suggestion of what you might want to do next, such as when you push the
Measure
button and then the
Ch1
button:
Use multipurpose purpose knob to select measurement type
Information about the action the oscilloscope performed, such as when you
push the
Default Setup
button:
Default setup recalled
Using the Menu System
When you push a front-panel button, the oscilloscope displays the corresponding
menu on the right side of the screen. The menu shows the options that are available
when you push the unlabeled option buttons directly to the right of the screen.
Vertical Controls
w w w . e k t
2
. c o m
Electronics
Katrangi
Trading
