Reference
Load your course on your
TBS1000B-EDU:
To load a new course on a TBS1000B-EDU oscilloscope,
1.
Insert the USB memory device that contains your course into the front-panel
USB slot of your TBS1000B-EDU.
2.
Push
Utility
►
- more - page 1 of 3
►
Update Course
.
3.
Use the
Multipurpose
knob to scroll through the resulting
fi
le list and to
highlight the desired course folder. Course folders have an .xpkg suf
fi
x.
4.
Push
Upload Course
to load the course into your oscilloscope.
Run labs on your
TBS1000B-EDU:
You can access the lab content via the dedicated
Course
button located on the
on the front panel. Use the oscilloscope’s soft keys and the multipurpose knob to
access up to 8 courses, which can have up to 30 labs each. Store up to 100 MB of
course material on the oscilloscope. Once you choose a lab, you can review the
overview section, perform the lab using the step-by-step procedure, collect data,
check and save the data results and generate reports that show the waveforms
created for each step in the procedure.
To run your desired lab:
1.
Push the
Course
front-panel button to enable operation of courseware directly
on the oscilloscope.
2.
Push a side-bezel menu item to choose the desired course from those listed.
3.
Turn the
Multipurpose
knob to highlight the lab to run. Push the knob to
select the desired lab.
4.
On the resulting screen, select the desired content from the side-bezel menu.
Read the
Overview
and the step-by-step
Procedure
. Push
Data Collection
and save results to a USB memory device.
5.
When done running the lab, select
Report
from the side-bezel menu. Use the
resulting side-bezel menu to enter your student identi
fi
cation number.
6.
Push
OK
from the side-bezel menu.
7.
On the resulting course report, push
Save
on the side-bezel menu. This will
save the report onto an attached USB memory device.
w w w . e k t
2
. c o m
Electronics
Katrangi
Trading