Application Examples
Taking Automatic
Measurements
The oscilloscope can take automatic measurements of most displayed signals.
NOTE.
If a question mark (?) appears in the Value readout, the signal is outside
the measurement range. Adjust the
Vertical Scale
knob (volts/division) of the
appropriate channel to decrease the sensitivity or change the horizontal
Scale
setting (seconds/division).
To measure signal frequency, period, and peak-to-peak amplitude, rise time, and
positive width, follow these steps:
1.
Push the
Measure
button to see the Measure Menu.
2.
Push the channel
1
or the
2
button. The measure menu appears to the left.
3.
Turn the
Multipurpose
knob to highlight the desired measurement. Push the
knob to select the desired measurement. .
The
Value
readout displays the measurement and updates.
4.
Push the channel
1
or
2
button to select another measurement. You can
display up to six measurements on the screen at a time.
Measure
Gating
On / Off
Ch1
Ch2
Math
Measurements
Period
Frequency
Peak-Peak
Minimum
Maximum
Mean
Cycle
Mean
Cursor
Mean
RMS
Cycle RMS
Cycle RMS
Rise Time
w w w . e k t
2
. c o m
Electronics
Katrangi
Trading
